Description (page 2 of 3)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine
00 Introduction and technical dataDescription · page 2 of 3
| LUBRICATION - Description | 1370 12V | 1747 16V |
|---|---|---|
| Values in mm | ||
| Engine lubrication system | forced feed via lobe gear pump with cartridge filter in series |
|
| Oil pump | lobe gears | |
| Pump operated | through crankshaft | |
| Oil pressure relief valve | incorporated in crankshaft front cover |
|
| between pump casing housing and driven gear | 0,080 ÷ 0,186 | |
| between the upper side of the gears and the pump cover | 0,025 ÷ 0,061 | 0,025 ÷ 0,070 |
| Full flow filter | cartridge | |
| Insufficient oil pressure sender unit | electrical | |
| Operating pressure at a temperature of 100°C | idling 1 bar at 4000 rpm 4 bar |
3,43 ÷ 4,93 bar |
| Oil pressure relief valve spring P1 | 6,28 ÷ 7,03 daN | |
| H1 | 36 | |
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.