Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)01 · 00 Introduction and technical data
01 · General

Test bench cycles of overhauled engines

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Engine › Test bench cycles of overhauled engines
00 Introduction and technical dataTest bench cycles of overhauled engines
Graph of engine power and torque curves showing CV kW DIN CEE on the left vertical axis, N·m kgm CEE DIN on the right vertical axis, and rpm on the horizontal axis from 1000 to 5000.
Test speed (rpm) Time in minutes Load on the brakes
800÷1000 10' no load
1500 10' no load
2000 10' no load

Test bench cycles of overhauled engines

During the bench test of the overhauled engine it is not advisable to run the engine at maximum speed, but to stick to the figures given in the table; complete the running in of the engine in the vehicle.

Engine power curves obtained by EEC method

The power curves illustrated can be obtained with the engine overhauled and run in, without a fan and with a silencer and air filter fitted at sea level.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.