Injection pump

Injection pump

The Lucas FT09 injection pump is designed specifically for indirect injection diesel pumps. New innovative features optimise engine service characteristics under all operating conditions. More specifically, the pump reduces fuel consumption, harmful emissions and noise levels.

The pump is rotary and its main characteristics are as follows:

• Injection advance altered by an electronic control unit.
• Centrifugal mass maximum flow regulator fitted to the pump shaft.
• Pump is lubricated by the fuel used to drive the pump.
• Extra fuel under conditions of fuel engine load or when full power is required.
• Coded, electronic fuel flow stop device built into the immobiliser system (Fiat CODE).

1. Idle speed adjustment screw
2. Fitting for diesel return line to tank
3. Throttle lever position sensor.
4. Accelerator control lever
5. Engine stop solenoid protective cover
6. Fast idle actuator control device
7. Fitting for diesel delivery line from filter
8. Diesel delivery fitting to injectors
9. Advance actuator
10. Fast idle cable