Refitting (page 2 of 2)

Lower the lift. 1. Rotate the driven toothed pulley until the timing references coincide.

Raise the lift and complete the fitting of the timing belt, checking the timing. 2. Using a screwdriver, apply force to the automatic tensioner so that the tensioner is in the maximum tension position, then tighten the nuts fixing the tensioner to the support. Remove the tool 1860905000 and rotate the engine through two revolutions in its normal direction of rotation.

3. Loosen the nut fixing the tensioner (3) and, using a screwdriver for leverage in order not to completely loosen the tensioner, make sure that the moving reference (1) on the tensioner coincides with the fixed reference (2), then tighten the tensioner (3) fixing nut to the recommended torque.