Removing-refitting (page 3 of 3)

NOTE To refit the power unit, reverse the removal instructions.

• Prepare the engine bay to refit the power unit. Take care to reconnect all electrical leads, pipes etc. in order to avoid any possible hitches;
• Take great care not to damage individual components when the power unit is fitted
• When fitting the coolant lines, align groove on rubber hose with ridge on associated rigid sleeve. When filling the cooling system, refer to section on "Removing-refitting radiator".

First secure engine end mount by tightening retaining bolts to the body by the specified torque. Then secure gearbox end mount and lastly the central differential end mount. Ensure that the power unit mounting points are properly secured.

Clutch pedal height