Removing-refitting power unit

REMOVING-REFITTING POWER UNIT

Position the vehicle on a lift, remove the front wheels and then proceed as follows:

1. Disconnect the battery negative lead, lift the positive terminal protective cover and disconnect the lead; unscrew the nut retaining the battery to the case and remove from engine bay.
2. Release electrical leads shown in figure from retaining clip, then unscrew relay carrier box cover retaining screw.
3. Remove the nuts retaining the relay carrier box to the battery case, then place the box to one side.
4. Remove the screws retaining the battery case to the body.
5. Undo nuts retaining leads shown in figure to batteryr positive terminal.