Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1370 12v) › Removing-refitting
10 EngineRemoving-refitting · page 1 of 3

Removing-refitting

Diagram showing the air intake line connection in the engine bay
Diagram showing the thermostatically-controlled air intake assembly and vacuum pipe connections

↑

↓

  1. Disconnect the air intake line shown in the figure.
  2. Remove the line shown in the figure, unscrew the screws retaining the thermostatically-controlled air intake, disconnect the underlying vacuum pipe and then remove the air intake assembly from the vehicle.
  3. To facilitate removal of the power unit from the engine bay, remove the thermostatically-controlled air intake bracket by undoing the bolts shown in the figure.
  4. Remove the pipe carrying air to the butterfly valve case.
  5. Disconnect the fuel outlet and inlet lines and the vacuum pipe (1) from the butterfly valve case.
Diagram showing the thermostatically-controlled air intake bracket and bolts
Diagram showing the fuel lines and vacuum pipe (1) connected to the butterfly valve case

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.