Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting (page 2 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1370 12v)
10 EngineRemoving-refitting · page 2 of 3
Diagram showing the fuel vapour recovery pipe connection labeled with callout number 1
Diagram showing the accelerator cable and connector connections on the butterfly valve case
Diagram showing the relay carrier bracket cover and electrical connectors, with icons indicating tools or actions
  1. Disconnect fuel vapour recovery pipe (1).
  2. Disconnect accelerator cable from butterfly valve case.
  3. Disconnect connector shown in figure from i.e. ECU.
  4. Undo screw shown in figure to remove relay carrier bracket cover; then disconnect connectors from relays and power module.
  5. Lift the vehicle, arrange a suitable component underneath and then undo the cap shown in the figure to drain the gear oil.
Diagram showing the relay carrier bracket cover removed, revealing the internal relays and power module with an inset detail view
Diagram showing the underside of the vehicle highlighting the gear oil drain cap location with an arrow

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.