Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting power unit

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1929 D) › Removing-refitting power unit
10 EngineRemoving-refitting power unit · page 1 of 8
Diagram showing the front engine bay with arrows pointing to bolts on the front beam and air intake shroud area.
Diagram of the air intake system with arrows indicating clips and a connection point for a line.

REMOVING-REFITTING POWER UNIT

Position vehicle on lift, disconnect battery negative lead, remove front wheels and then proceed as follows:

  1. Disconnect air intake shroud by undoing bolts shown in figure, which retain front beam.
  2. Disconnect air intake duct with resonator by undoing clips shown in figure. Take care to disconnect line shown in box.
  3. Lift cover protecting battery positive terminal and disconnect lead. Then remove battery by undoing nut and retaining bracket shown in figure. Unscrew nuts retaining leads shown in box to positive terminal.
  4. Remove relay and fuse box cover by undoing the retaining bolt.
Diagram showing the battery area with arrows pointing to the positive terminal cover, battery mounting bracket, and electrical leads.
Diagram showing the relay and fuse box cover with an arrow pointing to the retaining bolt.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.