Removing-refitting power unit (page 8 of 8)

1. Remove bolts retaining side power unit mounts to body.
2. Lower hydraulic jack and remove power unit from underneath vehicle.

Lower hydraulic jack gradually and check power unit is correctly positioned and balanced on the mount.

3. Arrange power unit on platform using a hydraulic lift.

Do not move power unit while fitted to hydraulic jack. To move the power unit, use a hydraulic lift fitted with tool 1860592000 after releasing from mount tool.

NOTE To refit the power unit, simply reverse order of operations described for removal.

• Prepare the engine bay to fit the power unit. Take care to connect all electrical leads, pipes etc. to ensure trouble-free installation;
• Take great care when refitting power unit in order to avoid damage to individual components;
• When refitting coolant lines, align groove on rubber hose with ridge on associated rigid sleeve.

Fasten engine end mount first and tighten bolts retaining mount to body to the specified torque. Then secure gearbox end mount and lastly the central differential end mount. Ensure that power unit mounting points are properly secured.

Clutch pedal height.