Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 5 of 8)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1929 D)
10 EngineRemoving-refitting power unit · page 5 of 8
Diagram showing the inner wheel arch area with retaining bolts and studs for the gearbox end wheel arch lining.
Two diagrams: top shows a steering link head being removed from a pillar arm; bottom shows an extractor tool (1847038000) in use on the connection.

↑

↓

  1. Remove gearbox end wheel arch lining by undoing retaining bolts and studs shown in the figure. To remove the protection, also disconnect brake lining wear sensor connection.
  2. Remove nut retaining steering link head to pillar, then remove from pillar arm using extractor 1847038000 (repeat operation for both heads).
  3. Remove bolts retaining pillar (gearbox and timing ends) to damper.
  4. Turn pillar to remove half-axle from wheel hub (repeat operation for both half-axles).

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.