Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 2 of 8)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1929 D)
10 EngineRemoving-refitting power unit · page 2 of 8
Diagram showing the relay and fuse box area with callout number 1
Diagram showing the battery holder area with arrows indicating screws and bolts

  1. Remove nuts retaining relay and fuse box to battery holder. Then position box to one side.
  2. Remove battery holder by undoing screws shown in figure. Also unscrew bolts securing starter motor supply lead bracket.
  3. The glow plug ECU is secured to the battery holder. Disconnect the supply lead and connection shown in figure.
  4. Disconnect engine cable joints with the front lead.
  5. Disconnect clutch cable by undoing nut (1) and locknut (2) shown in the figure. Also disconnect earth cable (3) from gearbox.
Diagram showing the glow plug ECU and electrical connections
Diagram showing the engine cable joints being disconnected
Diagram showing the clutch cable, earth cable, and numbered parts 1, 2, and 3

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.