Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Replacing timing belt

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing timing belt (1747 16v) › Replacing timing belt
10 EngineReplacing timing belt · page 1 of 3

Replacing timing belt

Diagram showing the upper bolts fixing the timing belt shield with arrows pointing to three bolt locations on a black plastic cover.
Diagram of the engine valve cover area, with callout number 1 indicating the bolts for the ignition coil cover.
Diagram of the cylinder head cover area showing electrical connectors and pipes, with callout numbers 1 and 2 indicating specific connection points.
  1. Undo the upper bolts fixing the timing belt shield, then remove the actual shield from the engine compartment.
  2. Remove the cover for the ignition coils acting on the bolts shown in the diagram; access can be gained to the bolts (1) by removing the engine oil filler cap.
  3. Disconnect the supply connections for the ignition coils, the earth cable (1) and the oil vapour recovery pipe (2) from the cylinder head cover.
  4. Disconnect the electrical connection shown in the diagram from the air conditioning compressor.
  5. Remove the cylinder head cover acting on the fixing bolts shown in the diagram.
Close-up diagram of an electrical connector and wiring harness being disconnected.
Diagram of the cylinder head cover being lifted away, showing the underlying components and fixing bolts.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.