Replacing timing belt (page 3 of 3)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Replacing timing belt (1747 16v)

10 EngineReplacing timing belt · page 3 of 3

1. Remove the gearbox protective casing shown in the diagram, then place the fly-wheel lock 1860898000 in position.
2. Remove the auxiliary shaft drive pulley on the crankshaft.
3. Check that the centering lug on the crankshaft drive gear is positioned on the same axis as the engine. Also remove the inspection cover on the bell housing and check that the reference on the flywheel coincides with the reference on the actual bell housing, as shown in the inset.
4. Loosen the tension of the timing belt acting on the nut shown in the diagram, then remove the actual belt.

02 Engine