Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Replacing timing belt (page 2 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing timing belt (1747 16v)
10 EngineReplacing timing belt · page 2 of 3
Diagram showing a hand using a special spanner to remove spark plugs from the engine cylinder head.
Diagram showing a dial gauge (tool 1895879000) positioned on the engine to check crankshaft alignment.

↑

  1. Remove the spark plugs using a special spanner.

↓

  1. Position the dial gauge by cylinder n° 1 using tool 1895879000, rotate the crankshaft until T.D.C. is obtained.
  2. Remove the 2nd camshaft fixing cap, inlet side and the 3rd camshaft fixing cap, exhaust side as shown in the diagram.
Diagram of the cylinder head with arrows indicating the 2nd and 3rd camshaft fixing caps to be removed.

F3 When removing the camshaft caps, they should be suitably marked so that when they can be correctly refitted. If this is not the case, it could give rise to problems concerning the reliability of the camshafts.

Diagram showing a pair of tools (1860875000) positioned and fixed onto the camshaft area of the engine.
  1. Position and fix the pair of tools 1860875000 by the previously removed caps.

F4 The pair of tools 1860875000 should exactly follow the profile of the camshaft cams.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.