Precautions (page 2 of 2)

Do not damage the converter centring nose while fitting the gearbox. If the point is damaged, it could fail to fit onto the cranskshaft correctly, and consequently damage the converter and oil pump.

Before fitting the transmission, make sure that the converter is fitted properly on the oil pump. If it is not fitted properly, the bush and oil pump gearing could be damaged.

Make sure that the distance between the holes of the bolts securing the converter to the flywheel and the gearbox front surface is 29.4 mm.

When fitting the gearbox, check that the centring pins are positioned correctly, and also check that there is no gap between the contact line between the engine and gearbox casing.