Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (Automatic) › Removing-refitting
21 Gearbox and differentialRemoving-refitting · page 1 of 9

Removing-refitting

Diagram showing the engine compartment with arrows pointing to bolts securing the air intake duct to the front cross panel.
Diagram showing the engine compartment with arrows pointing to clips on the air inlet pipe.
Diagram showing the battery and its mounting cage in the engine compartment.

REMOVING-REFITTING GEARBOX

Place the car on ramps, disconnect the battery’s negative pole, remove the front wheels and drain the gearbox oil, then proceed as described below:

  1. Remove the air intake duct by undoing the bolts shown in the figure, securing it to the front cross panel.
  2. Remove the air inlet pipe by undoing the clips shown in the figure, then remove it from the engine compartment complete with resonator.
  3. Left the cover protecting the battery’s positive pole and disconnect the cable; undo the nut securing the battery to the cage, then remove the battery from the engine compartment.
  4. Remove the relay and fuse box cover by undoing the bolt indicated.
Diagram showing a bolt indicated for removing the relay and fuse box cover.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.