Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting (page 9 of 9)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (Automatic)
21 Gearbox and differentialRemoving-refitting · page 9 of 9
Diagram showing the power unit central mounting with arrows indicating bolts to be removed
Diagram showing the power unit mounting on the gearbox side with arrows indicating bolts to be removed
Diagram showing the bottom bolts securing the gearbox to the engine with arrows pointing to the bolts
  1. Remove the power unit central mounting by undoing the bolts shown in the figure.
  2. Remove the power unit mounting on the gearbox side by undoing the bolts shown in the figure.
  3. Remove the bottom bolts securing the gearbox to the engine.
  4. Gently separate the bellhousing from the engine, then manoeuvre the converter back into its seating. For greater safety, fit a bracket, to be manufactured on site, screwing it into the seat of the bolt securing the gearbox bottom guard, to prevent the converter falling out of its seating.
Diagram showing the separation of the bellhousing from the engine and the converter seating area

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.