Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting (page 8 of 9)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (Automatic)
21 Gearbox and differentialRemoving-refitting · page 8 of 9
Diagram showing the lower guard on the gearbox with arrows indicating removal points
Diagram showing bolts securing the converter to the flywheel with arrows pointing to visible bolt locations
Diagram showing a bolt on the valve assembly cover with an arrow, alongside icons indicating up and down movement for the support tool
  1. Remove the guard shown in the figure from the bottom of the gearbox.
  2. Remove the bolts securing the converter to the flywheel. First undo the two visible bolts, then turn the crankshaft to gain access to the remaining bolts (total of 6).
  3. Undo the bolt shown in the fibure from the valve assembly cover to allow the gearbox support tool to be installed.
  4. Place the gearbox support tool 1860873000 on a hydraulic jack, then secure it to the gearbox at the points shown in the figure. To fit the tool correctly, also fit a bracket (1), to be manufactured on site, of the dimensions shown in the insert (dimensions in mm).
Diagram showing the gearbox support tool 1860873000 and bracket (1) positioned under the gearbox, with an inset technical drawing of the bracket dimensions in mm
Diagram showing the gearbox support tool 1860873000 secured to the underside of the gearbox

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.