Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting (page 4 of 9)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (Automatic)
21 Gearbox and differentialRemoving-refitting · page 4 of 9
Diagram showing a retaining bracket securing pipes, with callout number 1 pointing to the bolt.
Diagram showing the base of the windscreen wiper arms on the vehicle.
Diagram showing the area under the windscreen where plastic covers are located.
  1. Remove the bolt (1) securing the retaining bracket for the pipes shown in the figure.
  2. Remove the windscreen wiper arms (right and left) by undoing the central fixing nut, after removing the protective cap.
  3. Remove the plastic covers from the space under the windscreen, to allow the engine support tool to be installed during removal and refitting of the gearbox.
  4. Remove the gearbox top mountings.
  5. Fit a suitable supporting eye at the point shown in the figure, to hook up the power unit during removal of the gearbox.
Diagram showing the gearbox top mounting points indicated by arrows.
Diagram showing a supporting eye attached to the power unit near the gearbox.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.