Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)08 · 50 Auxiliary units
08 · General

Pulley electromagnetic coupling

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Compressor › Pulley electromagnetic coupling
50 Auxiliary unitsPulley electromagnetic coupling

Pulley electromagnetic coupling

Exploded view diagram of the pulley electromagnetic coupling showing parts labeled A through M

Parts of pulley electromagnetic coupling

  • A. Screw retaining electromagnetic coupling assembly to compressor shaft (M)
  • B. Hub with rubber coupling
  • C. Pulley retaining ring
  • D. Pulley for Poly-V belt
  • E. Solenoid retaining ring
  • F. Solenoids
  • G. Clutch clearance adjustment shims
  • H. Solenoid earth lead
  • I. Lead connected in line to safety thermal contact
  • L. Safety thermal contact
View of the compressor unit showing the mounted pulley and solenoid assembly

NOTE Safety thermal contact (L) opens when compressor temperature reaches a level of about 180 °C and closes when it reaches a value of about 120 °C.

Whenever the compressor is removed or handled, it should be positioned with the cover facing upward as shown in the figure to avoid oil leaks and the compressor becoming contaminated.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.