Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)08 · 50 Auxiliary units
08 · General

Refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Compressor › Refitting
50 Auxiliary unitsRefitting
Diagram showing a screwdriver removing the solenoid lead retaining screw (G) from the compressor assembly

Remove solenoid lead retaining screw (G).

Diagram showing a hand using a tool to remove ring (H) retaining solenoid and solenoid (I); inset shows the removed ring H

Remove ring (H) retaining solenoid and solenoid (I)

Refitting

Diagram showing compressor components including pin (M) and seat (L) for reassembly

Reassemble the components by reversing order of operations described for disassembly with particular attention to the following details:
Refit solenoid taking care to insert pin (M) properly in seat (L)

Diagram showing ring (N) being refitted to retain pulley; inset shows the ring N with convex part facing upward

Refit ring (N) retaining pulley with convex part facing upward

When fitting, replace all retaining rings removed previously

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.