Radiator and condenser cooling fans

NOTES Seal any disconnected pipe endings with watertight plugs and if o-rings are changed use only green o-rings that are resistant to coolant R 134 A.

RADIATOR AND CONDENSER COOLING FANS

Arrows indicate points where fan assembly is fastened to radiator.

1. Fan supply cable connectors
2. Nuts retaining fan motors to duct assembly
3. Additional resistor for fan low speed

EQUIPMENT USED FOR HANDLING COOLANT IN VEHICLE AIR CONDITIONING SYSTEM

The Cleaner 134 device (shown in figure) is used to carry out the following operations on a vehicle air conditioning system:

• - test system operation;
• - recover coolant in system;
• - clean recovered fluid;
• - empty and dry system;
• - recharging air conditioning system.

1. Pressure gauge assembly
2. Fitting for connection hose
3. Fitting for connection hose
4. Dispensing cylinder
5. Slot for viewing level of oil separated from coolant
6. Drain cock for oil separated from recovered coolant
7. Oil drain fitting
8. Master switch knob
9. Seat for supply lead plug (female)