Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)08 · 50 Auxiliary units
08 · General

Manual heating/ventilation system

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Heating/ventilation system › Manual heating/ventilation system
50 Auxiliary unitsManual heating/ventilation system · page 1 of 3

Manual heating/ventilation system

Diagram showing lines connecting heating/ventilation system components under the vehicle hood

Before removing-refitting, drain air conditioning system as described on page 25.

Lines connecting heating/ventilation system components

Removing/refitting line connecting condenser and dehydrating filter

  1. Unscrew bolts indicated in figure.

Removing/refitting line connecting compressor and condenser

  1. Unscrew bolts indicated in figure.

Removing/refitting line connecting compressor and evaporator

  1. Position vehicle on lift, then unscrew screw retaining return line to compressor.

  2. Remove first pipe section by unscrewing the nut indicated in the figure.

Illustrates removal of brake hose from master cylinder
Diagram showing a pipe connection with an arrow indicating removal direction
Diagram showing a pipe connection with an arrow indicating removal direction
Illustrates fuel line connection near engine mount

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.