Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)08 · 50 Auxiliary units
08 · General

Manual heating/ventilation system (page 3 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Heating/ventilation system
50 Auxiliary unitsManual heating/ventilation system · page 3 of 3
Diagram showing the battery mount with arrows indicating screw locations.
Diagram of the engine bay area near the air intake, with arrows pointing to connectors and clips.
Diagram showing the air duct connection with arrows indicating bolt locations.
  1. Unscrew the screws indicated in the figure and remove the battery mount.
  2. Disconnect the connectors and loosen retaining clips shown in figure.
  3. Unscrew the bolts indicated and removre air duct.
  4. Disconnect lines from retaining plate.
  5. Unscrew screws retaining power steering fluid reservoir to body and move out of the way.
Diagram showing a retaining plate with lines connected to it.
Diagram showing the power steering fluid reservoir mounted to the body, with arrows indicating retaining screws.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.