Autoreverse function

AUTOREVERSE FUNCTION

At the end of the tape, the side of the tape is changed automatically (Autoreverse).

The side of the tape being listened to is shown on the display.

To change the side of the tape, gently press the buttons shown in the figure until you hear a click.

EQUALIZATION

The equalization of the cassette reader is automatically selected to read chromium tapes (CrO2).

CLOCK FUNCTION

The clock function displays hours and minutes. A colon, between the hours and minutes, flashes at a frequency of once a second. The clock is still displayed when the radio is off.

Display modes

When the radio is on, two display modes are possible, with these characteristics:

Mode 1 (M1)

The clock is displayed instead of the radio messages (priority to clock function). When the radio is switched on without a cassette being inserted, or when a radio station is selected or a cassette is inserted with the radio on, the relevant message is displayed for about 10 seconds, after which the clock is again displayed.

Mode 2 (M2)

The messages relating to the radio function are displayed instead of the clock (priority to radio function).

When the radio is switched on, it automatically selects the mode present just before switching off.