Power cut

Power cut

If the power supply to the radio is cut off (even for a few minutes), when it is reconnected, the display shows "00 : 00" with the digits flashing and the colon fixed, indicating that the clock has to be reset.

DISPLAY INFORMATION

1. Number of preselected transmitting station.
2. Indication of RDS sub-bands.
3. Selection of Traffic Program mode.
4. Symbol of sensitivity of search of transmit-tint stations.
5. Colon between hours and minutes (in clock function).
6. Symbol indicating listening to transmission in stereo.
7. Direction of feed of cassette (in cassette playing function).
8. Distinctive letters of wave band.
9. Numbers indicating tuning frequency with decimal point of frequency.
10. Hours and minutes (in clock function).

CARE AND MAINTENANCE

Never expose the cassettes to heat or to direct sunlight, and always put them back in their boxes after use. It is recommended that you use high-quality tapes, and not longer than C-90 in order to ensure excellent reproduction at all times.

Clean the trim cover only with a soft anti-static cloth. Detergents and polishes could damage the surface.

Impurities on the reading head coming from the tapes could, over a period of time, cause a reduction in the high tones during reproduction. It is therefore advisable to clean the reproduction head periodically with a special non-abrasive head-cleaning cassette.