Tuning - manual search

TUNING - MANUAL SEARCH

Briefly press the button several times until the desired frequency band is selected.

Keep one of the buttons pressed until the letters "MAN" appear flashing on the display.

Press (**) one of the two buttons again to select the desired station.

(**) Press the button briefly to change frequency gradually and in stages, and press the button for longer for a fast frequency change.

NOTE The manual search function is NOT active for the FM-RDS bands.

After 60 seconds, or after pressing one of the buttons illustrated below and identified by the numbers 1 to 5, you pass from automatic tuning mode and the letters "MAN" flashing on the display disappear.

If one of the five buttons is pressed, the radio is tuned to the station previously memorized with that button.

NOTE When the frequency band is selected, you change from manual to automatic search.

MANUAL MEMORIZATION OF A STATION

You can memorize the station you are listening to within the selected frequency band by using of the 5 numbered buttons (figure below), which must be pressed until the station is again heard and the number of the button pressed appears on the display. The settings remain memorized even if there is a cut in the supply to the radio.