Finishing operations

Finishing operations

1. Correct any distortions to the panel using a hammer and dolly block.
2. Remove any weld slag using a disc grinder.
3. Renew the sealant on the rib removed previously, then refit it on the bodyshell making sure that it adheres perfectly to the roof.

Protections

1. Apply the electro-phoretic treatment to the areas previously involved in the welding.
2. Seal the joins between the roof and the bodyshell using IVI 854210 transparent acrylic sealant or an equivalent product.
3. Proceed with the painting and waxing stage.