Refitting

1. Undo the upper bolts fixing the wing to the vehicle and the lower window lining.
2. Undo the bolt fixing the wing to the front pillar cover, then separate the wing from the adhesive sealant.

Refitting

3. Remove the old sealant from the area in contact with the vehicle.
4. Apply sealant to the contact area between the wing and the vehicle.
5. Place the replacement part in position, tighten the bolts fixing the wing to the vehicle, then refit all the components previously removed.

NOTE Use SIKAFLEX 221 (made by SIKA) sealant which hardens at ambient temperature or an equivalent product.