Positioning the replacement part

Positioning the replacement part

1. Renew the sealant on the bodyshell ribs, using IVI 854210 transparent acrylic sealant or an equivalent product.
2. Carefully place the replacement part in position .
3. Check that the roof panel is perfectly positioned on the bodyshell.
4. Fix the replacement part to the bodyshell using the special self-locking clamps.

Welding the spare part

1. Carry out the brass welding using an oxyacetylene canister by the corners of the front and rear roof pillars.
2. Using a continuous welder continue the operation on the entire contact edge between the roof and the bodyshell.