Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Finishing operations

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing body panels › Finishing operations
70 BodyworkFinishing operations

Finishing operations

  1. Correct any distortions to the panel using a hammer and dolly block.
  2. Remove any weld slag using a disc grinder.
Diagram showing the rear section of the car bodyshell with a disc grinder tool indicated in an inset box

P4A098M01

Protections

  1. Apply the electro-phoretic treatment to the areas previously involved in the welding.
  2. Seal the joins between the rear cross member cover and the bodyshell using IVI 854210 transparent acrylic sealant or an equivalent product.
  3. Proceed with the painting and waxing stage.
Diagram showing the rear section of the car bodyshell with three tools indicated in inset boxes on the right: a spray gun, a drill/grinder, and a wax applicator gun

P4A098M02

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.