Split rear seat right backrest - r.r.
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Rear seats › Split rear seat right backrest - r.r.
SPLIT REAR SEAT RIGHT BACKREST - R.R.
Removing
Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R.
1. Undo the front bolts fixing the backrest.
Tilt the backrest forward.
1. Undo nut (1a) on the bolt joining the right backrest (1b) to the left backrest (1c).
1. Unscrew both rear nuts (1a) securing backrest (1b).
Remove the seat backrest from the vehicle.
Refitting
- Check that the seat backrest is not damaged.
- Place the seat backrest in position in the vehicle.
- Fold down the seat backrest.
- Screw in the two rear nuts fixing the backrest and tighten them to torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| REAR SEAT BACKREST REAR FASTENING | Nut | M10x1.25 | 3,6 ÷ 4,4 |
- Screw in and tighten the nut on the bolt joining the right backrest to the left backrest and tighten to the specified torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| REAR SEAT CENTRE BRACKETS | Nut | M10x1.25 | 3,6 ÷ 4,4 |
- Raise the backrest and screw in both bolts securing the front of the backrest and tighten to the specified torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| LEFT/RIGHT BAND FASTENING REAR SEAT BASE AND REAR SEAT BACKREST TO CROSSMEMBER | Bolt | M10x1.25 | 3,6 ÷ 4,4 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| REAR SEAT CENTRE BRACKETS | Nut | M10x1.25 | 3,6 ÷ 4,4 |
Parts & tools for this job For 2005 Fiat Croma
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.