Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)01 · General information
01 · General

Heavy usage of the vehicle

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Car general features › Heavy usage of the vehicle
General informationHeavy usage of the vehicle

HEAVY USAGE OF THE VEHICLE

For versions produced from 01/2006

If the vehicle is used mainly in any of the following particulary harsh conditions:

- towing a trailer or caravan;

- dusty roads;

- short, repeated journies (less than 7-8 Km) at sub-zero outdoor temperatures;

- engine often idling or driving long distances at low speed (e.g. taxi or door to door deliveries) or long period of idleness.

- urban routes;

the folowing checks must be carried out more often than indicated in the Planned Maintenance Programme:

- check front disc brake pad condition and wear;

- check cleanliness of bonnet and boot locks, cleanliness and lubrication of linkage;

- visually inspect condition of: engine, gearbox, transmission, rigid and flexible pipes (exhaust - fuel system - braking system) rubber elements (boots - hoses - bushes - etc.);

- check battery charge and battery fluid level (electrolyte);

- visually inspect condition of various drive belts;

- check and, if necessary, replace pollen filter;

- check and, if necessary, replace air filter.

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.