Engine marking positioning
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Identification plates › Engine marking positioning
General informationEngine marking positioning
ENGINE MARKING POSITIONING
1.8 engine
The engine marking is stamped on the cylinder block/crankcase, gearbox side, near the engine oil filter.
2.2 engine
The engine marking is stamped on the flat part of the engine oil filter case.
1.9 Multijet 8v engine
The engine marking is stamped on the cylinder block/crankcase, gearbox side.
1.9 Multijet 16v - 2.4 Multijet 20v Engine
The engine marking is stamped on the cylinder block/crankcase, gearbox side.
Parts & tools for this job For 2005 Fiat Croma
- PARTEngine gasket setSearch: Fiat Croma 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.