Left front wheel - r.r
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Hubs and wheels › Left front wheel - r.r
‹ Prev Rear wheel geometry - check using optical equipment, includes adjustment if necessaryNext › Right front wheel - r.r
Suspension and wheelsLeft front wheel - r.r
LEFT FRONT WHEEL - R.R
Removing
- Position the vehicle on a lift.
- Undo the bolts and remove the left front wheel.
Refitting
- Position the left front wheel in its housing and secure it tightening the new bolts to the recommended torque.
The wheel studs used on this vehicle have M12 x 1.5 threads and can be identified by a groove in the centre of the head.
It is absolutely forbidden to swap these bolts for bolts from other vehicles.
The use of other studs could irreparably damage the wheel hub threads and make it necessary to replace them.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Steel wheels | Wheel bolts | M12 x 1.5 | 10.8 ÷ 13.2 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Alloy wheels | Wheel bolts | M12 x 1.5 | 10.8 ÷ 13.2 |
- Remove the vehicle from the lift.
‹ Prev Rear wheel geometry - check using optical equipment, includes adjustment if necessaryNext › Right front wheel - r.r
Parts & tools for this job For 2005 Fiat Croma
- PARTFront wheel bearingSearch: Fiat Croma 2005 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Fiat Croma 2005 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.