Steering control and linkage
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Steering unit › Steering control and linkage
Tightening torquesSteering control and linkage
STEERING CONTROL AND LINKAGE
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Steering wheel | Nut (to replace) | M16 | (steering shaft side) 4.5 - 5.5 | |
| Steering rods | Nut | M12 | (steering knuckle side) 3.0 - 4.0 | |
| Steering rod | Locknut | M14 | (power assisted steering box side) 5.5 - 6.5 | |
| Steering column | Bolt (to be replaced) | M8 | (power assisted steering box side) 2.3 - 2.8 | |
| Support with steering control shafts. | Nut | M8 | (bodyshell side) 1.1 - 2.0 | |
| STEERING CONTROL TO DASHBOARD | Nut | M8 | 1,2 ÷ 1,8 |
Parts & tools for this job For 2005 Fiat Croma
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.