Front suspension
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Suspension and wheels › Front suspension
Tightening torquesFront suspension
FRONT SUSPENSION
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Front suspension lower track control arm | Bolt (to be replaced) | M10 | (steering knuckle side) 2.7 - 3.3 + 60° | |
| Front suspension lower track control arm | Bolt (to be replaced) | M12 | (chassis side) 8.1 - 9.9 + 75° | |
| Front suspension anti-roll bar | Bolt | M8 | (chassis side) 1.8 - 2.2 | |
| Front suspension frame | Front-rear bolts (to replace) | M12 | (bodyshell side) 9.0 - 11.0 + 90° | |
| Underbody reinforcements | Inner bolt (to replace) | M12 | (bodyshell side) 8.1 - 9.9 + 45° | |
| Underbody reinforcements | Outer bolt (to replace) | M10 | (bodyshell side) 5.0 - 6.1 + 45° | |
| Underbody reinforcements | Bolt (to be replaced) | M12 | (front suspension frame side) 9.0 - 11.0 + 90° | |
| Front shock absorber | Nut | M12 | (mounting side) 8.0 - 12.0 | |
| Front shock absorber | Bolt (to be replaced) | M8 | (bodyshell side) 1.8 - 2.2 + 45° | |
| Front shock absorber | Bolt (to be replaced) | M12 | (steering knuckle side) 7.7 - 9.4 +75° | |
| Front suspension anti-roll bar joint | Nut | M12 | (shock absorber side) 6.0 - 7.0 | |
| Front suspension anti-roll bar joint | Nut | M12 | (anti-roll bar side) 6.0 - 7.0 |
Parts & tools for this job For 2005 Fiat Croma
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Croma 2005 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.