E.g.r. system solenoid - r + r

Operation 1080C24 · Exhaust gas recirculation system (e.g.r.)

Removing

Proceed with the removal - 1044B10 fuel filter assembly - r + r or replace.

1. Undo the bolts (1a) and (1b), then remove the engine oil return pipe from EGR solenoid to throttle body (1c).

2. Remove the gaskets.

1. Disconnect the electrical connection from the E.G.R. valve.

1. Undo bolts (1a) and disconnect the water/exhaust gas heat exchanger for the E.G.R. system (1b) from the EGR system solenoid.

2. Undo the bolts (2a) and remove the E.G.R. system solenoid valve (2b).

3. Remove the bracket.

Refitting

Refit the E.G.R. system solenoid with spacer and tighten it using the bolts.

Connect the EGR system water/exhaust gas heat exchanger to the EGR system solenoid and tighten the bolts.

Connect the electrical connection to the E.G.R. valve.

Refit the rigid pipe from EGR solenoid to throttle body in its housing complete with gasket and secure it with the bolts.

Proceed with the refitting - 1044B10 fuel filter assembly - r + r or replace.