1016 cylinder head/s – valve (all)

Make

Fiat

Model

Doblò Factory Service Manual

Year

2000–2010

Section

10 engine › 1016 cylinder head/s – valve (all)

Manufacturing data and tolerances1016 cylinder head/s – valve (all)

1016 CYLINDER HEAD/S – VALVE (ALL)

Clearance with valve in closed position (mm)			Validity
Exhaust	Inlet
0.30 - 0.40	0.25 - 0.35		1.9 JTD
Contact band width with valve "l" (approx), (mm)		Validity
2.0		1.9 DIESEL
Recess from cylinder head surface (mm)		Validity
0.1 - 0.5		1.9 JTD
Stem diameter (mm)		Validity
7.974 - 7.992		1.9 DIESEL 1.9 JTD
Stem diameter, Inlet/Exhaust (mm)		Validity
5.90 ÷ 5.94		1.3 JTD
Upper band taper with vlve (Gradi)			Validity
Exhaust	Intake
28˚	20˚		1.9 DIESEL
Valve clearance (mm)			Validity
Exhaust	Intake
0.45 ± 0.05	0.40 ± 0.05		1.2 8v
Valve contact band taper with valve "a" (Gradi)		Validity
45˚ 30'+/- 5'		1.9 DIESEL
Valve thickness (mm)		Validity
>/= 1		1.6 16v

03 General