1024 crankshaft and flywheel – main bearings

Make

Fiat

Model

Doblò Factory Service Manual

Year

2000–2010

Section

10 engine › 1024 crankshaft and flywheel – main bearings

Manufacturing data and tolerances1024 crankshaft and flywheel – main bearings

1024 CRANKSHAFT AND FLYWHEEL – MAIN BEARINGS

Half-bearing thickness (mm)			Validity
Category B	Category C	Class A
1.836 ÷ 1.844	1.843 ÷ 1.849	1.831 ÷ 1.837	1.9 DIESEL
Half-bearing thickness (mm)			Validity
Category B	Category C	Class A
1.841 ÷ 1.846	1.846 ÷ 1.851	1.836 ÷ 1.841	1.3 JTD
Shim with undersize of 0.127 (mm)			Validity
Category B	Category C	Class A
1.899 - 1.907	1.906- 1.912	1.894 - 1.900	1.9 DIESEL
Shim with undersize of 0.254 (mm)		Validity
1.963 1.973		1.9 DIESEL
Shim with undersize of 0.508 (mm)		Validity
2.090 2.100		1.9 DIESEL
Thickness (mm)			Validity
Category B	Category C	Classe A
1.839 - 1.843	1.842 - 1.846	1.836 - 1.840	1.9 JTD
Thrust washers (mm)		Validity
2.310 ÷ 2.360		1.3 JTD

03 General