HEATED SEATS - FUNCTIONAL DESCRIPTION

1.2 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V, 1.9 DIESEL · from 10/2000, up to 10/2000

Functional description

The seat heating circuit is controlled by the relay R13. It is supplied directly by the battery via a line protected by fuse F2 housed in the engine compartment junction unit B01.

The coil energizing signal consists of an earth signal leaving pin 14 of connector X of the body computer M01.

The output supply signal from the relay R13 passes through fuse F45 and leaves the junction unit under the dashboard B02 from pin 4 connector D. This signal then reaches pin 2 of the heater pad I65 contained in the driver''s seat. When the switch is turned on the supply reaches the heater pad O40 which heats up the seat.

The heater pad is earthed via pin 1.

The operation of the switch I65 also lights up the LED in the actual switch.

1.2 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V, 1.9 DIESEL · from 12/03

Functional description

The seat heating circuit is controlled by the relay R13. It is supplied directly by the battery via a line protected by fuse F2 housed in the engine compartment junction unit B01.

The coil energizing signal consists of an earth signal leaving pin 14 of connector X of the body computer M01.

The output supply signal from the relay R13 passes through fuse F45 and leaves the junction unit under the dashboard B02 from pin 4 connector D. This signal then reaches pin 2 of the heater pad I65 contained in the driver''s seat. When the switch is turned on the supply reaches the heater pad O40 which heats up the seat.

The heater pad is earthed via pin 1.

The operation of the switch I65 also lights up the LED in the actual switch.

1.4 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V · from 12/03 · MY 2005

The seat heating circuit is controlled by relay R13 of under-dashboard junction unit B02.

This is supplied directly by the battery via a line protected by fuse F2 contained in engine compartment control unit B01.

The coil excitation signal consists of an earth signal leaving pin 14 of connector X of body computer M01.

The power supply leaving relay R13 flows through fuse F45 and leaves under-dashboard junction unit B02 from pin 4 connector D.

This sigal then reaches pin 2 of switch I65 contained in the driver''s side seat.

When the switch is turned on, the power supply reaches heat pad O40, which heats the seat.

The heat pad is earthed via pin 1.

Operation of switch I65 also determines activation of the led in the switch.