Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)19 · Wiring diagrams and electrical functions
19 · Electrical

Rearscreen wash/wipe - description

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Electrically activated devices › Rearscreen wash/wipe - description
Wiring diagrams and electrical functionsRearscreen wash/wipe - description

REARSCREEN WASH/WIPE - DESCRIPTION

1.4 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V · from 12/03 · MY 2005

The rearscreen wiper is activated by turning the ring nut on the end of the lever on the right of the steering wheel.

This allows intermittent operation of the rear wiper.

Pushing the lever gently towards the facia (unstable operation) activates the rearscreen washer function, via the windscreen washer pump, which rotates in the opposite direction and sends the detergent fluid towards the back.

When the lever is held down, the rear wiper is activated and operates until the lever is released and continues for another stroke or so.

The rear wiper may be operated only with the key ON.

The rear wash/wipe circuit is protected by a special fuse and controlled by a relay (that also controls therear wash/wipe circuit) in the under-dashboard junction unit.

The rear wiper is regulated by a device built into the stalk unit.

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.