E.G.R. SYSTEM SOLENOID - R + R

Operation 1080C24 · EXHAUST GAS RECIRCULATION SYSTEM (E.G.R.)

2.0 JTD 8V

Removing

See in Op. 1080C17

- Disconnect the negative battery terminal.

1. Disconnect the electrical connection for the EGR system solenoid valve.

2. Disconnect the vacuum pipe (2a) on the brake servo pipe and the EGR valve vacuum pipe on the intake manifold (2b) from the solenoid valve.

3. Undo the fixing bolt.

4. Remove the EGR system solenoid valve.

Refitting

- Fit the EGR system solenoid valve and tighten the fixing bolt on the mounting bracket.

- Connect the vacuum pipe on the brake servo pipe and the vacuum pipe to the EGR valve to the solenoid valve.

- Connect the electrical connection for the EGR system solenoid valve.

- Connect the negative battery terminal.

See in Op. 1080C17