Connecting rod small end bush - replace
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Pistons and connecting rods › Connecting rod small end bush - replace
EngineConnecting rod small end bush - replace
CONNECTING ROD SMALL END BUSH - REPLACE
Removing
1. Remove the bush (1a) from the small end using a hydraulic press, a suitable plate (1b) and the tool (1c).
| Description | Code | Function | |
|---|---|---|---|
| 1c | Fitting tool | 1.860.624.000 | Small end bush removal/introduction |
Refitting
1. Fit a new bush (1a) in the small end using a hydraulic press, a suitable plate (1b) and the tool (1c).
The bush should be fitted in the small end so that the lubrication port is aligned with the one in the small end.
| Description | Code | Function | |
|---|---|---|---|
| 1c | Fitting tool | 1.860.624.000 | Small end bush removal/introduction |
- Ream the inner diameter of the small end bush to the recommended figure.
| Subject | Value | |
|---|---|---|
| Engine connecting rod small end bush | mm | |
| Inner diameter | 32,010 - 32,020 |
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.