Crankcase sump and covers – auxiliary unit
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine › Crankcase sump and covers – auxiliary unit
‹ Prev Cylinder head(s) – single cylinder head - removing and refittingNext › Crankshaft and flywheel – crankshaft
Manufacturing data and tolerancesCrankcase sump and covers – auxiliary unit
CRANKCASE SUMP AND COVERS – AUXILIARY UNIT
| Subject | Value | Validity |
|---|---|---|
| Auxiliary unit | 2.8 JTD 8V | |
| Length mm | 39 | |
| Under a load of daN | 10,5 +- 0,4 | |
| Auxiliary unit | 2.8 JTD 8V | |
| Length mm | 32 | |
| Under a load of daN | 14,6 +- 0,6 | |
| Auxiliary unit | mm | 2.8 JTD 8V |
| End float | 0,055 - 0,090 | |
| Auxiliary unit | mm | 2.8 JTD 8V |
| Radial clearance | 0,030 - 0,085 |
‹ Prev Cylinder head(s) – single cylinder head - removing and refittingNext › Crankshaft and flywheel – crankshaft
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.