Crankshaft and flywheel – crankshaft
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine › Crankshaft and flywheel – crankshaft
‹ Prev Crankcase sump and covers – auxiliary unitNext › Pistons and connecting rods – pistons and connecting rods
Manufacturing data and tolerancesCrankshaft and flywheel – crankshaft
CRANKSHAFT AND FLYWHEEL – CRANKSHAFT
| Subject | Value | Validity |
|---|---|---|
| Crankshaft | mm | 2.8 JTD 8V |
| Main journal diameter | 80,182 - 80,208 | |
| Main journal diameter | 86,182- 86,208 (*) | |
| Crankshaft | mm | 2.8 JTD 8V |
| Main journal undersize | 0,254 - 0,508 | |
| Crankshaft | mm | 2.8 JTD 8V |
| Crankpin diameter | 56,515 - 56,538 | |
| Crankshaft | mm | 2.8 JTD 8V |
| Crankpin undersize | 0,254 - 0,508 | |
| Crankshaft | mm | 2.8 JTD 8V |
| Ovality | 0,005 | |
| Taper | 0,005 | |
| Crankshaft | mm | 2.8 JTD 8V |
| Main journal misalignment | 0,05 | |
| Crankpin misalignment | 0,125 | |
| Main bearing half thickness | mm | 2.8 JTD 8V |
| Category A | 2,165 - 2,174 | |
| Category B | 2,319 - 2,428 | |
| Category C | 2,573 - 2,682 | |
| Connecting rod bearing half thickness | mm | 2.8 JTD 8V |
| Category A | 1,875 - 1,884 | |
| Category B | 2,129 - 2,138 | |
| Category C | 2,483 - 2,492 | |
| Crankshaft bearings | mm | 2.8 JTD 8V |
| Radial clearance | 0,032 - 0,102 | |
| Crankshaft | mm | 2.8 JTD 8V |
| End float | 0,049 - 0,211 | |
| Engine connecting rod bearings | mm | 2.8 JTD 8V |
| Radial clearance | 0,35 - 0,83 |
‹ Prev Crankcase sump and covers – auxiliary unitNext › Pistons and connecting rods – pistons and connecting rods
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.