Tiiming system – tappets and rocker shafts
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine › Tiiming system – tappets and rocker shafts
‹ Prev Timing system – belt-driven timing systemNext › Tiiming system – camshafts (2) in camshaft housing (1)
Manufacturing data and tolerancesTiiming system – tappets and rocker shafts
TIIMING SYSTEM – TAPPETS AND ROCKER SHAFTS
| Subject | Value | Validity |
|---|---|---|
| TAPPET SHIM | mm | 2.8 JTD 8V |
| Inlet valves clearance in closed position | 0.45 - 0.55 | |
| Exhaust valves clearance in closed position | 0.45 - 0.55 | |
| Exhaust valves clearance in closed position | mm | 2.8 JTD 8V |
| Exhaust valves clearance in closed position | 0.45 - 0.55 |
‹ Prev Timing system – belt-driven timing systemNext › Tiiming system – camshafts (2) in camshaft housing (1)
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.