Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)19 · 19 Gearbox
19 · Transmission

2.2. Re-assembling

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Components internal to the gearbox › 2.2. Re-assembling
19 Gearbox2.2. Re-assembling · page 1 of 3

Remove :

  • The 3rd 4th clutch engagement sleeve assembly (7)
  • 3rd speed gear synchronizer ring (8)
  • The 3rd speed gear (9)
  • The stop ring (10); Using tool [3]
  • 2nd speed gear (11)
  • 2nd speed gear synchronizer ring (12)
  • The stop ring (13); Using tool [3]
  • The 2nd 1st clutch engagement sleeve assembly (14)
  • The 1st speed gear synchronizer ring (15)
  • 1st speed gear (16)
  • The stop ring (17); Using tool [3]
A press tool is shown removing a bearing from a gearbox shaft. The bearing is labeled with the number 18.

Figure : B2CM03WD

Remove the bearing (18) using a press.

2.2. Re-assembling

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.