Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)19 · 19 Gearbox
19 · Transmission

3.2. Re-assembling

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Components internal to the gearbox › 3.2. Re-assembling
19 Gearbox3.2. Re-assembling · page 1 of 5
Exploded view of gearbox control components showing numbered parts 1 through 9 including mounting bracket, bolt, pin, shaft, seal, springs, spacer and gear engagement finger

Figure : B2CM041D

Immobilise the control mounting (1) in a vice.

Remove :

  • The (2) bolt
  • The pin (3)
  • Shaft (4) and its seal (5)
  • The spring (6)
  • The spacer (7)
  • The return spring (8)
  • The gear engagement finger (9)

3.2. Re-assembling

Carry out the re-trim operations in the reverse order to the stripping operations.

Tightening of the bolt (2) to 2 daN.m.

4. Differential housing

4.1. Stripping

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.